Hubs

Vortex Hub: 5 on 4 1/2" Lug Pattern For 3500 lb Axles Maintenance Free / Water Tight Made by Dexter Axle Per Warranty Must Use Lucas Marine Grease...

Vortex Hub w/ Spindle: 5 on 4 1/2" Lug Pattern For 3500 lb Axles Tie Down 6 year / 100,000 Mile Warranty Maintenance Free / Water Tight Made by De...

Vortex Hub: 6 on 5 1/2" Lug Pattern For 5000 - 6000 lb Axles Tie Down 6 year / 100,000 Mile Warranty Maintenance Free Made by Tie Down Engineering...

Vortex Hub w/ Spindle: 6 on 5 1/2" Lug Pattern For 5000 - 6000 lb Axles Tie Down 6 year / 100,000 Mile Warranty Maintenance Free Made by Tie Down ...

Tie Down 5 Lug Integral Hub / Rotor Hub & Rotor Combo 5 on 4 1/2 Bolt Pattern Pre-Assembled, Packed, and Greased Galv X Anti Corrosion Finish ...

Vortex 5 Lug Integral Hub: Hub & Rotor Combo Complete with Bearings, Races, Seals 5 on 4 1/2 Bolt Pattern Anti Corrosive Galv X Finish Tie Dow...

Vortex 5 Lug Integral Hub: Hub & Rotor Combo Complete with Bearings, Races, Seals, and Spindle 5 on 4 1/2 Bolt Pattern Anti Corrosive Galv X F...

Idler Hub Kit Fully Greased Galvanized, 5 on 4.5" Lug Pattern 3.5K Capacity Includes: Races, Studs and , Lug Nuts, Bearings, Grease Seal, Dust Cap...

Idler Hub Kit Fully Greased Galvanized 6 on 5.5" Lug Pattern 5.2K Capacity Packaged W/ Races, Studs and , Lug Nuts, Bearings, Grease Seal, Dust Ca...

8 Lug 7k Idler Packed, Greased, and Ready to Roll **Available with Stainless Steel Lug Nuts** Idler Hub Galvanized 8 on 6.5" Lug Pattern Fit...

5 Lug Spindle w/ Grease Fitting - Fits Most 3500 lb Axles Dimensions: 1 3/8" ID x 1 1/16" ID 5 Lug Spingle Fits Most 3500 lb Axles PosiLube Zerk...

        The Posi Lube Spindle features a zerk fitting on the hub face allowing hubs to be greased and flushed completely with being disassembled. ...

Drive In Stud .5" -20 X 2" Commonly Used On 3.5-7K Axles Part # 4759-20-Z AT# 1076

Drive In Stud .5" -20 X 2.5" Commonly Used On 3.5 - 7K Axles Part # 4759-25-Z AT# 1087

Bearing Kit for 1750 lbs Hubs Available w/ Stainless Steel Lug Nuts Bearing Kit Fits Most 5 Lug Hubs Fits Most 3,500 lb Trailer Axle Components I...

BEARING KIT  FITS MOST 6 LUG HUBS / 5200K AXLEs INCLUDES: 1 - INNER RACE (25520) 1 - INNER BEARING (25580) 1 - OUTER RACE (15245) 1 - OUTER BEARI...

8 Lug Bearing Kit Fits Most 6k-7k Axles Kit Includes- 1 Outer Bearing (14125A) 1 Outer Race (14276) 1 Inner Bearing (25580) 1 Inner Race (25520) ...

Vortex Hub Dust Cap Fits 6 Lug Vortex Hubs Screw On Features Seal Tight O Ring Part # 48357BV AT# 3022

Vortex Hub Dust Cap Fits 5 Lug Vortex Hubs Screw On Features Seal Tight O Ring Part # 48355V AT# 3021

Removable Dust Cap Grommet Grease Cap Center Replacement Grommet Posi Lube / EZ Lube  Remove to Grease Posi Lube Spindle Part # RP-100 AT# 259

Drive In Dust Cap 1.986" OD Fits Standard 5 Lug 3.5k Hub  Removable EZ Lube Grommet Works with Posi Lube Spindle Replacement Plug is AT # 259 ...

EZ Lube 6 Lug Grease Cap 2.45" OD W/ Removable Grommet Fits Standard 6 Lug 5.2k Hub Part # 21-1-AL-100 AT# 264

8 Lug EZ Lube Drive In Dust Cap Grommet 2.72" OD Removable Grommet Grease Cap Used with 7.2-8K Hubs Part # 1605-AL-100 AT# 2293

Standard Cotter Pin 1/8" x 2" Steel

Spindle Castle Nut 1" - 14 6 Slot Commonly Used For 2-8K Axles Part # 4754-12 AT# 252

Trailer Spindle Washer 1" ID 1.75" OD Part # 4753 AT# 1099

D Ring Spindle Washer D Shape .875" ID Part # 4753-D AT# 244

Spindle Washer w/ Locking D Fold 1" ID Steel Part # 93001 AT# 245

Sold Individually 100% Stainless Steel Thread Pattern: 1/2-20 Right Hand Style: 1/2" Accorn Lug Nut The Best Rust-Proof Trailer Lug Nu...

9/16" - 18 Cone Shaped Lug Nut Thread Size: 9/16" - 18 Conical Seat: 60° (60 Degrees) Anti Corrosive Zinc Coating Steel Construction Thread Direc...

1/2" - 20 Cone Shaped Zinc Lug Nut Thread Size: 1/2" - 20 Cone Shaped 60° Cone (60 Degree) Anti-Corrosive Zinc Finish Solid Steel AT# 1088

45032 5L Vortex Lube Shield Fits Most 5 Lug Vortex Hubs  Easy Slide Over Installation Seals Over O Ring O Ring Not Included Dimensions: Out Side ...

45033 6L Vortex Lube Shield Fits Most 6 Lug Vortex Hubs  Easy Slide Over Installation Seals Over O Ring O Ring Not Included Dimensions: Out Side ...

1.12" ID  x 1.78" OD - 11174TB Hub Seal used with 3/4" Bearings Rubber Double Lip Inside Seal Bronze / Metal Exterior Dimensions: 1.12" Inner Dia...

010-019-00 / 171255TB Rear Hub Seal for Most 5 Lug 1750 lb Hubs Fits Most Hubs for 3500lb Axles Double Lip Spindle Seal Bronze Colored Finish / Bl...

6 - 8 Lug Rear Hub Seal Double Lip Seal 2.25" ID X 3.376" OD Commonly Used On 5.2-8K Axles Part # 22333TBN AT# 1024

10-36 Seal Dexter Seal Rubber Lip Inside Seal Green Exterior Coating Dimensions: 2.22" Inner Diameter 3.375" Outer Diameter Markings: Dexter TR...

RACE 15245 Works with 15123 bearing Outer Diameter (In):  2.441 Inch Cup Width (In):  0.562 Inch

Works with L44649 & L44643 bearings. Outer diameter: 1.980" Markings: L44610 B14 RTK

Works with L68149 bearing. Outer diameter: 2.361" Fits the H84545, GVH84545, HD84546, 845475, 845476, H84550, 84556, 84555, 84557, 84655, 84656, a...

VAULT HUB - MADE BY DEXTER 8 Lug 7k Idler Packed, Greased, and Ready to Roll **Available with Stainless Steel Lug Nuts** Idler Hub Includes Sp...